Laminating Resins
Two part polyurethane and epoxy resin systems used for model making, pattern making, laminating, rapid prototyping and resin infusion.
- A high temperature 3-part epoxy laminating resin to be used in conjunction with our HX series low temperature tooling prepreg range.
- This resin works with the following hardener: EH-2900 RT curing, unfilled, low viscosity, good compatibility with glass fibres and fillers.
- This resin system works with the following hardeners: EH-2906 RT curing, unfilled, high mechanical properties at RT cure, slow reactivity. EH-2905 RT curing, unfilled, high mechanical pr...
- This resin system works with the following hardeners: EH-2902 Temperature resistant (120°C), unfilled, low viscosity, fast reactivity. EH-2903 Temperature resistant (120°C), unfilled low...
- This resin system works with the following hardeners: EH-2954 and EH-2955.
- This resin system works with the following paste: EH-2907 Laminating Paste, RT curing.
- This resin system works with the following paste: EH-2952 Laminating paste, high temperature resistance (115°C).
- This resin system works with the following paste: EH-2950 Prefabricated, two component coupling coat. Temperature resistant (115°C).
